The Fiend 2020 Type B+ BMX Bike is almost exactly the same as the regular Fiend Type B model. Almost. Where it differs is that Fiend upgraded the B+ to a Mission Deploy Freecoaster rear wheel so that rolling backwards is a breeze. Strength is built into the foundation of this bike with chromoly being employed by the frame's front triangle, forks, bars, and cranks. Every bearing found on the Type B is sealed creating a smooth ride that can handle different weather conditions and extreme riding with ease. On this build, you will find that a majority of the parts are aftermarket out of the Fiend or Mission BMX catalog. Four nylon pegs are even included with this model meaning that the Fiend Type B+ is ready for anything right out of the box. If you are planning on a lot of fakies, then the Fiend Type B+ is the model you want to look at.
FRAME: Fiend Type B High-Tensile Steel with Chromoly Headtube, Toptube and Downtube (20.75" Toptube)
FORK: Fiend Type B 100% Chromoly with Tapered Legs (26mm Offset)
HEADSET: Sealed Integrated (1-1/8")
STEM: Fiend Crown Top Load (50mm Reach)
BARS: Fiend Type B 100% Chromoly (9" Rise)
GRIPS: Fiend Team Flangeless
CRANKS: Chromoly (165mm)
BOTTOM BRACKET: Sealed Mid (19mm)
PEDALS: Nylon Fiend Reynolds
CHAIN: Mission 410
SPROCKET: Fiend Steel (25T)
FRONT HUB: Mission Echo Sealed (3/8")
REAR HUB: Mission Deploy Sealed Freecoaster (14mm)
DRIVER: 9T Sealed (Right Hand Drive)
FRONT RIM: Mission Mylar Doublewall (36H)
REAR RIM: Mission Mylar Doublewall (36H)
FRONT TIRE: Innova Street 2.4"
REAR TIRE: Innova Street 2.4"
SEAT: Fiend 1-Piece Combo
SEAT POST: Steel (25.4mm Diameter) (150mm Length)
SEAT CLAMP: Alloy Single bolt
LEVER: Mission Token
BRAKES: Mission Cease
BRAKE MOUNTS: Removable
GYRO TABS: N/A
EXTRAS: 4 x Pegs with Nylon Sleeves
Color: Trans Brown
WEIGHT: 27.7 lbs (with Brakes and 2 Pegs)
Headtube Angle: 75°
Seattube Angle: 71°
Stand Over Height: 9"
BB Height: 11.625"
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on February 14, 2020