The Fiend 2020 Type O+ BMX Bike integrates aftermarket parts and stronger materials with a full size top tube to create a bike that is perfect for beginner through intermediate riders. At 20.75", this top tube caters to a wide range of rider heights. Fiend made sure that this bike can hold up to extreme riding by kitting it with many aftermarket parts from themselves and Mission BMX. Sealed bearings are used for the headset, bottom bracket, and rear wheel where most of the stresses from hard landings are found. To construct a solid foundation the frame has a chromoly top tube and down tube, the forks have a chromoly steerer tube, and the cranks are built from chromoly as well. Needless to say, the Fiend Type O+ will perform amazingly in the streets, parks, or out on the trails.
FRAME: Fiend Type O High-Tensile Steel with Chromoly Toptube and Downtube (20.75" Toptube)
FORK: Fiend Type O Chromoly Steerer and 100% High-Tensile Steel Tapered Legs (26mm Offset)
HEADSET: Sealed Integrated (1-1/8")
STEM: Fiend Crown Top Load (50mm Reach)
BARS: Embryo Type O High-Tensile Steel (9" Rise)
GRIPS: Fiend Team Flangeless
CRANKS: Chromoly (165mm)
BOTTOM BRACKET: Sealed Mid (19mm)
PEDALS: Nylon with Chromoly Spindles
CHAIN: Mission 410
SPROCKET: Fiend Steel (25T)
FRONT HUB: Mission Echo Loose Ball (3/8")
REAR HUB: Mission Siege Sealed Cassette (14mm)
DRIVER: 9T Sealed (Right Hand Drive)
FRONT RIM: Mission X7 Singlewall (36H)
REAR RIM: Mission X7 Singlewall (36H)
FRONT TIRE: Innova Street 2.4"
REAR TIRE: Innova Street 2.4"
SEAT: Fiend 1-Piece Combo
SEAT POST: Steel (25.4mm Diameter) (150mm Length)
SEAT CLAMP: Alloy Single bolt
LEVER: Mission Token
BRAKES: Mission Cease
BRAKE MOUNTS: Welded
GYRO TABS: N/A
EXTRAS: 2 x Pegs with Nylon Sleeves
Color: Flat Green
WEIGHT: 24.9 lbs (without Pegs) 28.7 lbs (with Pegs)
Headtube Angle: 75°
Seattube Angle: 71°
Stand Over Height: 9"
BB Height: 11.625"
Need help building your complete bike? Check out our bike build video below.
NOTE: To ensure that every component on your bicycle is working properly, Dans Comp recommends that all bikes be assembled by a qualified mechanic. Improper assembly of your bicycle may lead to premature wear or failure of individual components such as headsets, crank assembly and wheels. Failure to do so may void the manufacturer warranty.
This product was added to our catalog on February 14, 2020