The new SRAM Guide RSC is packed with ride-enhancing performance that makes every new trail a trusted old friend. We started from scratch, to create the perfect combination of braking reliability and control. Brand-new SwingLink™ technology provides more power, silky-smooth modulation, less deadband and better lever-feel than you’ve ever experienced. Steep-line confidence. Deep-corner dominance. Ride every trail like you own it. KNOW YOU CAN. Now featuring the World Championship-winning S4 caliper with Bleeding Edge™ and Heat Shield technologies.
- *1800mm Hose, Rotor not included
New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding, dedicated bleed adapter for the S4 caliper plugs into the bleed port and seals the system to minimize air contamination and fluid loss.
Contact Point Adjustment™:
Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same.
SRAM’s new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions.
Lever Pivot Bearings:
Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel.
MatchMaker and MMX Compatible:
Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™is also available and works with any split-clamp design and RockShox® PushLoc.
The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.
Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.
Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision.
Timing Port Closure:
A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.
Pad: Steel-backed organic
Fluid: DOT 5.1
Adjustment: Tool-free Reach Adjust, Contact Point Adjust, Banjo Adjust
Special Features: Tool-free Reach Adjust, Contact Point Adjust, Piggyback Reservoir, MatchMaker™ X compatible, Bleeding Edge™, Heat Shield
Technology Highlight(s): SwingLink™, PURE™ Bladder, Timing Port Closure, Lever Pivot Bearings, Bleeding Edge™, Heat Shield
Material: Forged aluminum
Pad / Holder: Top-loading
Intended Use: TR/AM/FR
System: Open System
Rotor Sizes: 140 (rear), 160, 170, 180, 200mm
Tri-Align Caliper Positioning System: No
Tool-Free Pad Replacement: Yes
Bend Zone™: Yes
Stainless Hardware: Yes
This product was added to our catalog on July 8, 2016